For more than five decades, Saulsbury has built a strong repeat customer base through our successful execution of projects and our collaborative approach to business which includes providing excellent construction services. Our ability to take care of the business and project needs of our clients has resulted in building lasting customer relationships. This has been a major component of the ultimate success of our company. Working jointly with our customers, we make the commitment that their projects are performed safely, are cost-effective, and completed on time with the highest quality.
Saulsbury provides EPC services on many of our projects; however, much of our work is based on a construction-only scope of work. From new greenfield facilities to brownfield expansions, we are licensed to provide our services throughout most of the U.S. for the various industries that we serve. Our range of project sizes varies from small installations to projects that exceed hundreds of millions of dollars. The duration of projects can range from days to years of construction for large complex projects.
Saulsbury is often a single-source provider with the expertise to consistently complete nearly 96 percent of the construction scope with our direct hire labor forces. Having the ability to self-perform most of the on-site work allows us to be cost-competitive and have full control and responsibility for the outcome of our projects. Our project team leaders perform well with control over cost, quality, safety, and the schedule of each project resulting in a predictable and successful outcome for our clients. We are also able to complete single discipline areas of scope for our clients on projects when requested. Our strong planning abilities, collaborative approach, and consistent site leadership are key components to delivering successful projects when multiple contractors are utilized.
Our typical direct-hire scope of service includes the following:
- Project management and site management
- Site maintenance – security, receiving/warehousing, dewatering, dust control, snow removal, etc.
- Excavation and backfill
- Concrete and rebar
- Structural steel fabrication and erection
- Equipment setting and grouting
- Pipe fabrication and installation
- Electrical installation – high, medium, and low voltage
Learn more about our capabilities and experience from our projects.
El Paso Power Station
Saulsbury provided the civil, mechanical, E&I construction and commissioning services of units one and two for the client’s power station.
Simple Cycle Power Plant Construction
Saulsbury performed the general construction of a nominal 90 megawatts simple cycle power plant in Watford City, North Dakota.
Combined Cycle Power Plant and Water Treatment Facility
Saulsbury provided the general construction for a combined cycle power plant and water treatment facility in Snyder, Texas.
General Construction of 80 MW Simple Cycle Power Plant
Saulsbury performed the general construction of a nominal 80-megawatt simple cycle power plant for a state public service company in a matter of a few months.
VFT Installation in Laredo, Texas
Saulsbury completed the electrical and civil/structural installation of the equipment for a 17-kilovolt switchyard and a 100-megawatt VFT at a client's substation site in Laredo, Texas.
General Construction and Electrical Installation of a Natural Gas Power Plant
Saulsbury performed all civil work for the complete installation of foundations and under and above ground I&E for a 550-MW natural gas-fired power plant.
Installation of Turbine Compressor Stations
Saulsbury was awarded contracts to construct three large turbine-driven compressor stations along a major natural gas pipeline for one of the largest oil and gas companies in North America.
Permian Basin Compressor Station Construction
Saulsbury was awarded a contract for the construction of a 200-MMSCFD compressor station for one of the Permian Basin's most active operators.
Installation of Three Compressor Packages in Western Wyoming
Saulsbury installed a total of three Cat 3612 driven Ariel 4 throw compressor packages at two Brownfield locations.
Balmorhea Diamond Processing Facility
Saulsbury was awarded the contract to construct three cryogenic processing plants at our client's Diamond Processing Facility.
Coyanosa, Texas Cryogenic Processing Complex
Saulsbury partnered with a long-time client to to fully engineer and construct two cryogenic processing plants near Coyanosa, Texas.
Hughes County, Oklahoma Cryogenic Processing Plant
Saulsbury completed full engineering, procurement, and construction of a 200-MMSCFD cryogenic plant, including liquid stabilization, slug catching, gas dehydration, and residue gas compression.
Goliad, Texas Cryogenic Processing Plant
Saulsbury provided the engineering, design, and construction for the installation of a Thomas Russell 200-MMSCFD cryogenic plant at a greenfield site.
Denver-Julesburg Basin Cryogenic Processing Facility
Saulsbury partnered with a long-time client and one of the region's largest publicly-traded natural gas processors to fully engineer and construct a 200-MMSCFD cryogenic processing plant at the company's processing complex in Colorado's DJ Basin.
Cryogenic processing facility in Watford City, ND
One of North America's largest midstream companies hired Saulsbury to complete the civil and mechanical construction, as well as instrumentation and electrical for one 60-MMSCFD cryogenic plant and one 150-MMSCFD cryogenic plant.
Cryogenic Processing Complex in Jal, New Mexico
Saulsbury fully engineered and constructed three cryogenic processing plants for their client's facility in New Mexico's Delaware Basin.
Lovington, New Mexico Cryogenic Processing Plant
Saulsbury completed the full engineering, procurement, and construction of a 200-MMSCFD cryogenic plant as well as liquid stabilization, slug catchers, liquid gas treating and dehydration, acid gas reinjection, inlet gas compression, and residue gas compression.
Reeves County, Texas Cryogenic Processing Facility
Saulsbury installed their 38th cryogenic plant Reeves County, Texas. In addition, Saulsbury installed refrigeration, amine, stabilization, residue compression, and all associated equipment at the plant.
Weld County, Colorado Processing Plant
Saulsbury was contracted to fully engineer and construct a 200-MMSCFD cryogenic processing facility in Weld County, Colorado as the second train to an existing facility.
Alkoxylation Plant in Pasadena, Texas
Saulsbury performed the general construction of a client's large-scale alkoxylation facility in Pasadena, Texas.
FCCU Expansion Project in Big Spring, Texas
Saulsbury was responsible for all E&I work associated with this large-scale expansion including pre-outage, unit shutdown and post-shutdown scopes.
Low-Sulfur Gasoline Unit in Big Spring, Texas
Saulsbury performed the construction for an all-new low-sulfur gasoline unit at the Big Spring refinery including civil, structural, mechanical, and electrical & instrumentation.
Low-Sulfur Diesel Project in Big Spring, Texas
Saulsbury completed the construction of several units at the plant including a 20,000-barrels-per-day diesel hydrotreater.
SCOT Tail Gas Unit in Big Spring, Texas
Fundamental engineering, procurement, and construction of the refinery's Treatment Unit and Sulfur Recovery Unit expansion.
Crude Unit Expansion in Lovington, NM
Saulsbury completed an EPC Crude Unit Expansion at a refinery in Lovington, NM. This project resulted in increased crude oil processing capacity from 30,000 BPD to 45,000 BPD.
ROSE Unit Construction in Artesia, NM
Saulsbury relocated a client's residuum oil supercritical extraction (ROSE) unit (asphalt plant) for a refinery in Artesia/Lovington, New Mexico.
Condensate Splitter Construction
Saulsbury completed the construction of a 50,000 BPD grassroots crude oil condensate splitter in Corpus Christi, TX
EPC of Micro-LNG Plant in Jacksonville, Florida
Saulsbury performed engineering, procurement and construction of a grassroots micro-LNG plant in Jacksonville, Florida. Saulsbury integrated the LNG liquification process provided by the client with the balance of plant.
Micro-LNG Plant in Jacksonville, Florida
Saulsbury performed the engineering, procurement, and construction on a grassroots micro-LNG plant in Jacksonville, FL.
Natural Gas Condensate Storage and Trucking Facility in Freeport, Texas
Saulsbury performed all of the engineering, procurement, and construction on this natural gas condensate storage and trucking facility.
Doe Canyon CO2 Booster Station
As part of the CO2 Program Expansion Project in Cortez, Colorado, Saulsbury was tasked with increasing the station throughput of the Doe Canyon CO2 gathering system and preserving the ability of the station to operate with declining CO2 well production pressures.
CO2 Program Expansion in Cortez, Colorado
Saulsbury completed a complex CO2 program enhancement for leading midstream client including multiple pump stations and compressor stations. The project overall provided a 300 MMSCFD capacity increase to the client's pipeline system.
CO2 Recovery Plant Construction
Saulsbury served as the electrical contractor for a plant designed to provide high purity CO2 for injection for enhanced oil recovery.
CO2 Pipeline Installation in West Texas
Saulsbury's Field Services Group was contracted to install a client's CO2 pipeline from Denver City, Texas to Snyder, Texas.
Precipitator Rebuild in Boone County, Kentucky
Saulsbury provided the construction installation services for the rebuild of a client's hot side electrostatic precipitators (ESP) at a 648-megawatt, single turbine plant in Boone County, Kentucky.
Hydroprocessing Renewable Diesel Plant
Saulsbury was contracted to complete the electrical and construction work for a 3-MMgy hydroprocessing renewable diesel plant in Carlsbad, New Mexico.
Environmental Retrofit Project in Northeast Texas
Saulsbury was awarded electrical and instrumentation contracts for the environmental retrofit of a client's 1,650-MW coal-fired power plant in Northeast Texas.
Taylor County, Texas Wind Farm
When it was discovered that the foundations of several wind turbines on a West Texas wind farm were installed improperly, the client turned to Saulsbury.
Wastewater Treatment Project in Clovis, New Mexico
Saulsbury was responsible for all aspects of the installation of underground piping, grounding and duct banks, concrete foundations, and buildings for the effluent water treatment system of a cheese manufacturing facility in Clovis, New Mexico.
CaTS Concrete and Excavation Project in Northeast Nevada
Saulsbury provided the labor, supervision, equipment, facilities, transportation, and all other essentials necessary for a concrete and excavation project at a client's CaTS facility in Northeast Nevada.
Site Preparation and Installation for Texas Aggregate Plant
Saulsbury completed all site preparation, mass excavation, and installation of all foundations and reclaim tunnel for an aggregate plant in north Texas.
Odessa Power Plant Water Treatment Facility
Saulsbury performed the civil, mechanical, structural/piping fabrication, building erection, and electrical and instrumentation associated with a water treatment plant servicing a new 1000-MW combined cycle power generation facility.
Reactor Cooling Water Project
Saulsbury was awarded a contract to complete a reactor cooling water project for a client's chemical plant in La Porte, Texas.